ilexa Onboard Diagnostics Forum
09:45 9 09 2010 *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Search Login Register  
ilexa Onboard Diagnostics Forum > Car diagnostic, running and general mechanical faults > Chrysler > Voyager 3.3 petrol 1997. ABS blowing fuse
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Voyager 3.3 petrol 1997. ABS blowing fuse  (Read 219 times)
0 Members and 1 Guest are viewing this topic.
steve pearman
Sr. Member
****
Offline Offline

Posts: 260
« on: 09:10 23 01 2010 »
Looked at this for a non start and found the engine ecu blowing the fuel pump fuse as soon as the battery was connected?, replaced the ecu and now starts and runs OK, but now the abs w/l is staying on and that fuse (25A) also blows straight away.
It s looking like the battery may have been jumped the wrong way round, but the customer says not. Does anyone know where the abs module is located on this model.

Steve.
Logged
EndaIRL
Recent Member
**
Offline Offline

Posts: 90
« Reply #1 on: 13:48 23 01 2010 »
autodata shows it (in hydraulic modulator) towards the back right of engine bay as you look in
Logged
steve pearman
Sr. Member
****
Offline Offline

Posts: 260
« Reply #2 on: 23:45 29 01 2010 »
Found the abs module/pump underneath the car around the front passenger area. (more duff info from Autodata)
Short went when I disconnected the module, parts dept came back with no stock world wide.

Steve.
Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.8 | SMF © 2006-2008, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.1 seconds with 21 queries.