Citroen Synergie 1.9 td lx immobiliser problem

[markythesparky]

came to start and no lights on pull down key pad removed keypad and found 4 broken wires 2 of them broken to close to the connecter to re solder is there anywhere i can get a 15 way connector from to replace the existing one and as anybody got a wiring diagram as the wire are all the same colour

[northern steve]

Hi Mark

The 15 pin connector works in a similar way to a scotchlock , take the top section off and you can remove the piece of broken wire and lay a new piece in place , refit the top and this pushes the new bit of wire into place , i have a diagram somewhere and i will try to dig it out and let you know

Steve