|
VAUX-COM update to version 061201 |
|
|
The latest VAUX-COM free update is available. This update includes many new additions including service interval resetting, steering angle calibration, injector coding....
The update contains new software and interface firmware
This update adds support for
- Omega-B, X25DT
- Vectra-C, Z16XE
- Vectra-C, Z18XE
- Vectra-C, Y20DTH
- Vectra-C, Y22DTR
- Vectra-C, Z22SE
- Vectra-C, Y30DT
- Astra-H, Z17DTL
- Astra-H, Z17DTH
- Zafira-B, Z19DT
- Vivaro EDC15C3, F9Q 762 measuring blocks, and output tests
- Vivaro BCM, Airbag, ABS measuring blocks, and output tests
This update also includes new procedures
- Reset Steering-angle sensor, on Astra-H, Vectra-C
- Reset/Program BCM module on Corsa-C, Meriva, Tigra-B
- Reset/Program IPC module on Corsa-C, Meriva, Tigra-B
- Program new keys to Vectra-C, Astra-H, Zafira-B
- Reset Service interval on Corsa-C, Meriva, Tigra-B
- Reset Service interval on Astra-G, Zafira
- Program EDC15VM parameters
- Replace injector on Multijet Z13DT/Y13DT engine
- Setting CAN configuration on Vectra-C, Astra-H, Zafira-B control units.
- Read-out stored km value from ECM (cross-checking with dash is possible!)
Interface firmware update includes
- user configurable protocol timing (allow user to set special, protocol related communication parameters)
- improved CAN transport layer
- added support for Omega-B, X25DT engine
- improved stability
You can download this free update direct from our website or if you would prefer to receive a CD, please email us
NOTE: When you install this update you will need to call for a password to use it for the first time. Please telephone us on 01726 884 010 while infront of your PC
When you've finished your software should show version 061201
|
